PTFE Coatings
PTFE coatings, or Polytetrafluoroethylene are superior non-stick fluoropolymer coatings with a very durable thin film coating. These products have the highest operating temperature of any fluoropolymer and have an extremely low coefficient of friction, good abrasion resistance and chemical resistance.
SERVICE INFORMATION
This coating is normally used where a smooth, low friction, corrosion resistant coating is necessary. One of the most popular uses of PTFE coatings is for non-stick applications or any application needing a food grade coating.
PTFE coating is one of the world’s most sought after non-stick products. PTFE non-stick fluoropolymer coating has outstanding release properties and can withstand a maximum use temperature of 500°F, higher than any other fluoropolymer. This coating is typically applied to a thickness of approximately 1 mil.
SERVICE INFO
| PTFE Coating Statistics | |
|---|---|
| Tensile Strength (ASTM D1708) | 4000 – 5000 psi |
| Elongation (ASTM D1457) | 50% |
| Impact Strength (ASTM D256) | 13 ft – lb/in |
| Hardness (ASTM D2240) | 60-90 HB (shore D) |
| Abrasion Resistance (Tabor) | 15 mg |
| Coefficient of Friction (ASTM D1894) | .15 – .35 static |
| Dielectric Strength (ASTM D149) | 1400 volts per mil |
| Use Temperature | 500°F max |
| Chemical Resistance (ASTM D543) | Good |
| Salt Spray Resistance (ASTM B117) | Excellent |
| Water Absorption (ASTM D570) | < .03 % |
| Thickness | .0008″ – .002″ |
Xylan® Coatings We Offer & Their Uses
Range Of Coatings
We provide worldwide quality coatings to various sectors including but not exclusive to industrial, oil & gas, oil-refining, petrochemical, marine, construction, mining, engineering, electronics and the military.
